TurboSplash PAC
Splash Fill Media

Brentwood TurboSplash PACs are splash media assemblies with hinged panels that can be installed in horizontal and vertical arrays for high thermal performance in counterflow and crossflow cooling tower applications. Each unit can be accordion-folded into a compact bundle for efficient, cost-effective storage and shipping and then unfolded in the tower for easy installation.
 TurboSplash Installation
Applications
TurboSplash PAC Fill Media is designed for counterflow and crossflow applications in the Power, Refining, Petrochemical, Steel, Chemical, Pulp & Paper, and Food Processing industries
Features and Benefits
• Highest thermal performance for counterflow splash fills.
• Folds into nested bundles (right) for easy, cost-effective shipping, storage, and installation. Approximately 26,000 panels or 13,000ft3 of SF150 can ship in one truckload.
• Simple, bottom-supported installation (No field assembly or hangers required).
• TurboSplash PACs can be configured in various spacings and angles to optimize performance.
• Constructed of durable, trouble-free Polyproylene Copolymer that 		TurboSplash
is resistant to alkalis, acids, and oils.
• Pipe Support Saddles (above right) are designed into the top and bottom of the TurboSplash panel frames for positive alignment and secure installation onto the intermediate supports (3/4"[19mm] Schedule 40 pipe).
• Available in 4" (SF100) and 6" (SF150) pair spread configurations.
• High Temperature Rated for continuous operation at 180°F (82.2°C) and a 24 hour maximum of 195°F (90.6°C).

Product Dimensions

PRODUCT PANEL PAIR
SPREAD
(S) 		PANEL
WIDTH
(W) 		PANEL
HEIGHT
(H)* 		EXPANDED
LENGTH
(EL) 		BUNDLED
LENGTH
(BL)
SF100-6 4 in.
(101 mm) 		24 in.
(610 mm) 		12 in.
(305 mm) 		6 ft.
(1.8 m) 		15"
(381 mm)
SF100-8 4 in.
(101 mm)		 24 in.
(610 mm)		 12 in.
(305 mm) 		8 ft.
(2.4 m) 		19.5"
(495 mm)
SF150-6 6 in.
(152 mm)		 24 in.
(610 mm) 		12 in.
(305 mm) 		6 ft.
(1.8 m) 		10.5"
(267 mm)
SF150-8 6 in.
(152 mm)		 24 in.
(610 mm) 		12 in.
(305 mm) 		8 ft.
(2.4 m) 		13.5"
(343 mm)

* Nominal

Product Weights
PRODUCT
 BUNDLE
WEIGHT 		PANELS
PER PACK 		PANELS
PER VOLUME
SF100-6 34.2 lbs.
(15.5 kg) 		36 3 per ft3
(105.9 per m3)
SF100-8 45.6 lbs.
(20.7 kg)		 48 3 per ft3
(105.9 per m3)
SF150-6 22.8 lbs.
(10.3 kg) 		24 2 per ft3
(70.6 per m3)
SF150-8 30.4 lbs.
(13.8 kg) 		32 2 per ft3
(70.6 per m3)


Thermal Performance
Brentwood TurboSplash PAC media achieves the highest thermal performance of counterflow splash media installations.

Installation

A) Use two Bottom Supports (a minimum of 1.5"[37mm] wide) per TurboSplash. turbo installationPanel row. Place bottom supports perdendicular to the hinged bar on the TurboSplash panel.

B) Use two Intermediate Supports (3/4" [19mm] Schedule 40 pipe) of convenient length between panel layers. Intermediate supports should have sufficient overhang and form a continuous rail. TurboSplash panels have integral Pipe Support Saddles for positive alignment with the pipe.

C) Independent Mid Supports are required when stacking panels over 6 layers high (approx. 6 ft. [1.8m]) or at lower heights when a higher-than normal fouling load is expected.

SAFETY REMINDER: Make sure that all assemblies are fixed and can take bearing loads. TurboSplash Pac assemblies will support normal workman loads, but installers should not walk directly on the hinged bars or on individual pairs of panels. For access to the installation, use plywood layered over 2"x4" (51mm x 102mm) stringers between the hinges.

Contact Brentwood for further detail on Installation Information

Back to top

Home | Contact | News | Cooling Tower Basics | Products | Links | Gallery

Copyright © 2008 Brentwood Industries, Inc.